Jason Orosco - Ford Ranger - MDR Class 1450 (Number 1474)

ceo001_tn.jpg (3105 bytes) ceo002_tn.jpg (3524 bytes) ceo003_tn.jpg (3533 bytes) ceo004_tn.jpg (3645 bytes) ceo005_tn.jpg (3603 bytes) ceo006_tn.jpg (2922 bytes) ceo007_tn.jpg (3011 bytes) ceo008_tn.jpg (2372 bytes) ceo009_tn.jpg (2929 bytes) ceo010_tn.jpg (3304 bytes) ceo011_tn.jpg (2880 bytes) ceo012_tn.jpg (3438 bytes) ceo013_tn.jpg (3500 bytes) ceo014_tn.jpg (3574 bytes) ceo015_tn.jpg (3419 bytes) ceo016_tn.jpg (2915 bytes) ceo017_tn.jpg (2820 bytes) ceo018_tn.jpg (3165 bytes) ceo019_tn.jpg (3523 bytes) ceo020_tn.jpg (3604 bytes) ceo021_tn.jpg (3867 bytes)

1993 ford ranger
4.0 liter v6
automatic

Modifications Include
-Camburg custom ibeams/radius arms with tranny cross member
-Fox 12" coilovers
-Baker motorsports custome dash
-Autometer gauges
-Lowrance gps
-Kenwood stereo
-Vertex radio w/ intercom
-Transwerx built A4LD with gate shifter
-American outlaw II 15 x 7 rims
-Goodyear MTR 35x12.50 tires
-Dual optima red tops
-Fox 16" triple by-pass shocks
-Camburg shackles
-Custom deaver spring pack
-32 gallon fuel safe cell
-Custom 8.8 inch axle by currie
-Spool
-5:13 gears
-35 spline axles
-2 hella ralleye 4000s
-Baker motorsports lightbar with 4 hella HIDs
-Setrab tranny cooler
-Baker motorsports custom spindles
-5/8 studs all around with 1 1/8 nuts