jk001_tn.jpg (5501 bytes) jk002_tn.jpg (5215 bytes) jk003_tn.jpg (5543 bytes)
jk004_tn.jpg (5374 bytes) jk005_tn.jpg (5147 bytes) jk006_tn.jpg (5524 bytes)
jk007_tn.jpg (4962 bytes) jk008_tn.jpg (5878 bytes) jk009_tn.jpg (5452 bytes)
jk010_tn.jpg (6066 bytes) jk011_tn.jpg (4629 bytes) jk015_tn.jpg (6320 bytes)
jk013_tn.jpg (6106 bytes)  jk014_tn.jpg (5132 bytes)  jk012_tn.jpg (5213 bytes)
jk016_tn.jpg (5254 bytes) jk017_tn.jpg (4765 bytes) jk018_tn.jpg (4689 bytes)
jk019_tn.jpg (5150 bytes) jk020_tn.jpg (6718 bytes) jk021_tn.jpg (6688 bytes)
jk022_tn.jpg (6096 bytes) jk023_tn.jpg (5622 bytes) jk024_tn.jpg (5490 bytes)


Jon Knutson
San Clemente, CA
1998 XLT 3.0 v6 Ford Ranger

JBA Headers
2.5” Flowmaster 40 series Exhaust

Front Suspension:
Built by Jeff Lewis of Precision Fabrication
2.5x10 King Coilovers
King Bump Stops
5.5 wider Upper and Lower A-Arms 16" of travel

Rear Suspension:
Deaver LT pack
Custom Shackles
King 2.5x14 Double Bypass
Bedcage is all chromoly 17" of travel

33x12.5x15 Maxxis Buckshot mudders
8pt Cab Cage, all Chromoly built by Jeff Lewis
2 Hella Rally 4000 Lights
2 Bucket seats with 4pt Harness
Some kind of sound system that sounds good!

Coming soon: Currie 9" w/ 4:56, Locker, 31 spline axles (have just need to put in) Connect cage from bumper to bumper Boxed lowers C-4 trans Fuel cell